Tiling

Affordable Tiling by Soil-Max

Soil-Max

 

3-Point Hitch Plow

3-Point Hitch Plow

The Gold Digger tile plow is designed to be the most affordable, hardest working plow in the industry. It’s slim design and Poly-Coated sides make the Gold Digger 20% easier to pull through the soil than any other plow on the market. A square tile boot minimizes friction, preventing stretching of the tile, and requires only 4 pounds of tension to pull the tile through the boot. A quick-change boot design allows boots to be swapped in 5 minutes or less. The boot is the same size as the tile, allowing for optimum tile support and minimal drag.

 

 

 

Pull-Type Plow

Pull-Type Plow

The pull-type Gold Digger plow comes stocked with all of the advantages in the 3-point hitch plus a forward axle rotation design. The Gold Digger pull-type plow is designed with forward axle rotation to allow for backing into tile mains with ease, control of grade independent of the tires, and free-flow of trash away from the frame.

 

Plows can be equipped with either a laser or Intellislope plow control system to control grade.

 

Intellislope

The Intellislope plow control system takes out the complicated grade calculations, eliminates moving laser tripods, and has no moving parts that can break or wear out.

Intellislope

With AutoTile by Intellislope, simply drive over the ground that is going to be tiled to map topography. Return to the starting point as Intellislope calculates the profile for the tile run and begin tiling! AutoTile allows you to set a tile depth and will follow the profile of the soil surface to maintain a constant depth while maintaining your grade. Intellislope uses a failsafe system that utilizes two sensors; a GPS reciever and a pitch sensor that work together to maintain pitch. If GPS is lost the Intellislope can still maintain control through the pitch sensor. Intellislope’s on-grade indicator gives feedback on the accuracy of the tile instillation.

 

20 Reasons Tile Helps

 

  1. Higher Yields and improved crop quality– Yields from over 125 drainage experiments produced the following estimated increase in yield attributed to sub-surface drainage: Corn-34% Alfalfa-42% Soybeans-29% Wheat-76%
  2. Faster Soil Warm-up– Tiled fields have the advantage of a 5-15 degrees warmer soil temperature. A wet soil is a cold soil. Surface evaporation, which has a cooling effect, is reduced. How would you like to set in cold water all spring?
  3. Less Compaction– By drying out faster and not working the ground wet you have much less chance of creating a compaction problem. Many yield problems can be traced back to compaction problems. If you deep-till a tiled field the chances are better it will stay uncompacted much better than non-tiled fields.
  4. Larger, Deeper Roots– By lowering the water table in the spring the roots continue to go down seeking moisture. Tiling creates air and water channels to encourage better root growth and soil penetration. By this means, the quantity of nutrients extractable by the plants is maintained at a higher level.
  5. Better soil aeration– Tiled soil can percolate better, allowing water and air to reach the roots. The channels created from water and air moving down through the soil to the tile let it breath. Roots are just like humans, they need to bring in oxygen and expel carbon dioxide. Can you relate to how much better you feel every time you get rid of a congested chest. Tiling is the decongestant for your soil.
  6. More favorable environment for beneficial soil microorganisms and earthworms– By opening the soil to breath all small microorganisms and earthworms and now thrive. These aerobic organisms are what help make nitrogen and sulfur more available.
  7. Less yield variation for more dependable cash flow– In a university study yields varied 46% on undrained soil versus 18% on tiled soil. Best of all, yields were consistently high.
  8. Allows more days of machinery operation– With faster dry up and warmer soils you can get in the fields earlier in the spring for planting and perform fall operations later in the year when cool temperatures slow down soil drying. Dry soils allow more timely postemergence applications and limit compaction.
  9. Allows earlier planting– Longer Growing Season allows you to plant earlier for higher yields.You can now pick the optimum variety for early plantings and high yields. In some years this alone can mean a phenomenal amount of difference in yield.
  10. Better soil structure– Promotes much better soil tilth since you aren’t working soil when it is wet. Tiling also increases soil granulation to allow better water and air interaction with the roots. The soil becomes more porous allowing the water to stay where it lands instead of running off.
  11. Increases yields in dry years– Deeper root development enables plants to better withstand summer droughts. Roots usually penetrate to within 15 inches of the water table. High water tables in the spring due to poor drainage cause shallow root development and a smaller soil volume from which plants can obtain moisture and nutrients. Since tiled crops are planted earlier and grow quicker they can mature before late summer stress sets in. (The early bird catches the worm and early season moisture!)
  12. Lowers Nitrogen losses– More Nitrogen caused by water-logged soils and the better activity of the aerobic organism. Tiling dries the soil to create the perfect environment for nitrogen utilization and aerobic organisms to thrive. How much did you spent for N this year! I bet it’s not pocket change, you well know that N is one of the most expensive inputs.
  13. Consistent Seed Stands– This can make or break you! Better Stands can be achieved by less rotting of seeds before germination. Perfect stands are much more likely when the tiled soil is 10 degrees warmer and the soil is dry and not mud. You can’t get top yields if you don’t have the plants there to begin with. Getting a good even stand is probably the most important ingredient to a high yield.
  14. Removes toxins– Certain toxic substances and disease organisms are removed from the soil due to better drainage and aeration. Specifically it lowers iron and manganese toxicity levels when air can reach these elements. Tiling is just like getting rid of a cold!
  15. Less Erosion– Soil erosion is reduced by increasing the capacity to hold rainfall and let it percolate through the soil instead of running off. Less erosion allows the fertility levels and soil structure that you have built for years to stay intact.
  16. One-Time expense– A one-time cost that pays back year after year with no further investment. Seed, fertilizers and chemicals cost you a bundle every year, machinery breaks down and needs replaced. Tile rakes in profits and higher yields for the rest of your life. Tiling is the “energizer bunny” of farm investments, it keeps going, and going….
  17. The profit is at the top end– It costs virtually the same to farm 120 bu/ac farm ground as it does 170 bu/acre farm land, maybe a little more drying and hauling. It is hard to make decent money until you hit the 150-220 bushel yield range. Dad always said, “Good farmers farm good ground.” Tiling turns farms into “good ground” .
  18. Lower Drying Costs– Tiled crops grow and mature faster and up to 6 points drier in the fall.
  19. Lowers Breakeven Price Per Bushel– With the same input costs and fixed costs, the breakeven on 130 bu/ac corn is $2.30/bu where if you had 160 bu/ac it is $1.87/bu.
  20. Lower Machinery Costs– With combines approaching $200,000 it is nice to know that tiled land allows you to be in the fields more days during the whole crop season and harvest. This allows you to get more done with less equipment and farm it when the conditions are right.

– Soil-Max

Click Here To Learn More About The Gold Digger Tile Plow